MICE RF System Review

Europe/London
Seminar 1 (STFC/Cosener's House, Abingdon, UK)

Seminar 1

STFC/Cosener's House, Abingdon, UK

Mark Palmer (Fermilab)
Description
This MICE RF system plan was substantially modified as part of the re-baselining of the MICE Demonstration of Ionization Cooling.  This review will examine the RF system design, plans for standalone commissioning of the RF modules at RAL, integration and commissioning of the system with the MICE Cooling Channel, as well as the schedule and resources required for each of these elements.  This review represents the first detailed evaluation of the revised plan.  Given the tight schedule constraints of the revised MICE plan, this review is aimed particularly at identifying any issues that require further attention by the RF team as the experiment moves towards deployment of the full Cooling Demonstration.


Review Charge
Supporting Doc: MICE ICD
  • Wednesday, 9 September
    • 1
      Executive Session
    • 2
      MICE Cooling Demonstration Project Overview
      Speaker: Dr Colin Whyte (University of Strathclyde)
      Slides
    • 3
      MICE RF System Introduction
      Speaker: Dr Kevin Ronald (University of Strathclyde)
      Slides
    • 10:45
      Coffee Break
    • 4
      RF Module Overview
      Speaker: Dr Derun Li (LBNL)
      Slides
    • 5
      RF Station Commissioning Status
      Speaker: Andy Moss (Daresbury Laboratory)
      Slides
    • 6
      RF Station Deployment Plan for the MICE Hall
      Speaker: Alan Grant
      Slides
    • 12:30
      Lunch
    • 7
      Executive Session
    • 8
      Low-Level RF System Status and Plans
      Speaker: Andy Moss (Daresbury Lab)
      Slides
    • 9
      Standalone Commissioning Plan in MICE Hall
      Speaker: Dr Kevin Ronald (University of Strathclyde)
      Slides
    • 15:15
      Coffee Break
    • 10
      RF Module Vacuum Interface Requirements
      Speaker: Terry Anderson (FNAL)
      Slides
      Supporting Docs
    • 11
      Executive Session
      Committee questions delivered at conclusion
  • Thursday, 10 September
    • 12
      UK Schedule and Resources
      Speaker: Alan Grant (Daresbury Lab)
      Slides
    • 13
      US Schedule and Resources
      Speaker: Prof. Alan Bross (Fermilab)
      Slides
    • 10:30
      Coffee Break
    • 14
      RF Module Integration Into Cooling Channel
      Speaker: Dr Colin Whyte (University of Strathclyde)
      Slides
    • 15
      Executive Session
    • 12:30
      Lunch
    • 16
      Closeout
      Slides
    • MICE Hall Tour