Name: 2018 High Power Targetry Workshop
Start: 2018-06-04T08:45:00-04:00
End: 2018-06-08T17:00:00-04:00
Location: No location set

2018 High Power Targetry Workshop

from Monday, June 4, 2018 (8:45 AM) to Friday, June 8, 2018 (5:00 PM)

Monday, June 4, 2018

8:50 AM

8:50 AM - 9:10 AM
9:10 AM Welcome Talk - Thomas Glasmacher
Welcome Talk
- Thomas Glasmacher
9:10 AM - 9:30 AM
9:30 AM High Power Targetry at FRIB - Frederique Pellemoine (Michigan State University - Facility for Rare Isotope Beams)
High Power Targetry at FRIB
- Frederique Pellemoine (Michigan State University - Facility for Rare Isotope Beams)
9:30 AM - 9:50 AM
9:50 AM C. Barbier / B. Riemer
C. Barbier / B. Riemer
9:50 AM - 10:50 AM
Contributions

9:50 AM Optimization of the LBNF Neutrino Beam - Laura Fields

10:30 AM Beam Dump Facility target: design status, beam tests in 2018 and material studies - Edmundo Lopez Sola (CERN)
10:50 AM Coffee Break
Coffee Break
10:50 AM - 11:10 AM
Room: 1300 FRIB Lobby
11:10 AM C. Barbier / B. Riemer
C. Barbier / B. Riemer
11:10 AM - 12:20 PM
Contributions

11:10 AM RaDIATE thermal shock experiments at CERN’s HiRadMat facility - Kavin Ammigan (Fermi National Accelerator Laboratory)

11:30 AM Research of Materials in Target Environment at European Spallation Source - Yong Joong Lee (ESS)

11:50 AM A first integrated CERN-ISOLDE spallation source operated at 2000°C with GW instantaneous beam power for isotope production - J.P. Ramos (CERN)
12:20 PM Lunch Break
Lunch Break
12:20 PM - 1:20 PM
1:20 PM C. Barbier / B. Riemer
C. Barbier / B. Riemer
1:20 PM - 2:20 PM
Contributions

1:20 PM Tungsten Oxidation AeroSol Transport (TOAST) Experiments - Per Nilsson (European Spallation Source)

1:40 PM Measurements of Target Strain Mitigation by Gas Injection - Willem Blokland (ORNL)
2:20 PM P. Hurh / F. Pellemoine
P. Hurh / F. Pellemoine
2:20 PM - 3:20 PM
Contributions

2:20 PM IAEA Activities in Support of the Accelerator Based Simulation and Modelling of Radiation Damage Effects - Danas Ridikas (IAEA)

3:00 PM FRIB Radiation Studies: Damage, Component Lifetimes, Hands-on Accessibility - Dali Georgobiani (FRIB/MSU)
3:20 PM Coffee Break
Coffee Break
3:20 PM - 3:50 PM
Room: 1300 FRIB Lobby
3:50 PM P. Hurh / F. Pellemoine
P. Hurh / F. Pellemoine
3:50 PM - 5:30 PM
Contributions

3:50 PM Investigation of radiation damage effect on advanced materials under different irradiation conditions - CARLOTTA ACCETTURA (Politecnico di Milano and CERN)

4:10 PM J-PARC neutrino beam-line and radiation damage studies on Titanium alloys - Taku Ishida (J-PARC/KEK)

4:30 PM The Influence of High Energy Proton Irradiation on Fine-Grained Isotropic Graphite Grades: A Summary of Recent RaDIATE Results - Patrick Hurh (FNAL)

4:50 PM Blister formation at subcritical doses in Tungsten irradiated by MeV protons - Inbal Gavish Segev (Soreq NRC)
5:30 PM Welcome Reception and Museum Visit
Welcome Reception and Museum Visit
5:30 PM - 9:30 PM
Tuesday, June 5, 2018

8:50 AM

8:50 AM - 9:00 AM
Room: 1200 FRIB Building
9:00 AM Y. Dai / D. McClintock
Y. Dai / D. McClintock
9:00 AM - 10:20 AM
Contributions

9:00 AM Techniques and Accomplishments of the Post Irradiation Examination Program at the Spallation Neutron Source - David McClintock (Oak Ridge National Laboratory)

9:40 AM Status Update of PIE Irradiated Materials from BLIP at PNNL - Andy Casella (PNNL)

10:00 AM Post-irradiation examinations of SINQ Target-11 - Yong Dai (Paul Scherrer Institute)
10:20 AM Coffee Break
Coffee Break
10:20 AM - 10:50 AM
Room: 1300 FRIB Lobby
10:50 AM Y. Dai / D. McClintock
Y. Dai / D. McClintock
10:50 AM - 12:10 PM
Contributions

10:50 AM Progress of specimen cutout and damage inspection for used mercury target vessel at J-PARC - Takashi Naoe (Japan Atomic Energy Agency)

11:10 AM NOVA Medium energy target ME-1 autopsy, procedure and equipment - Vladimir Sidorov (Fermilab)

11:30 AM Thermal diffusivity of proton and spallation neutron irradiated tungsten - Jemila Habainy (European Spallation Source ERIC)
12:10 PM Lunch Break
Lunch Break
12:10 PM - 1:10 PM
1:10 PM M. Calviani / C. Densham
M. Calviani / C. Densham
1:10 PM - 3:10 PM
Contributions

1:10 PM Operation of and Upgrade Plans for the LANSCE Pulsed Neutron Sources - Eric Pitcher (Los Alamos National Laboratory)

1:50 PM High-power converters for RIB production - Luca Egoriti (TRIUMF)

2:10 PM High power Beam dump for SARAF phase II - Eliyahu Ilan (Soreq Nuclear Research Center)

2:30 PM A high power density beam dump for ISOL@MYRRHA - Donald HOUNGBO (SCK-CEN)

2:50 PM High Power Capability of the Primary Beam Dump Drum for FRIB – Simulation and Experimental Study - Mikhail Avilov (FRIB Michigan State University)
3:10 PM Coffee Break
Coffee Break
3:10 PM - 3:40 PM
3:40 PM M. Calviani / C. Densham
M. Calviani / C. Densham
3:40 PM - 5:00 PM
Contributions

3:40 PM Spallation Neutron Source Target Module Design Improvements - Drew Winder (Oak Ridge National Laboratory)

4:00 PM The LIEBE high-power target: Offline commissioning results. - Ferran Boix Pamies (CERN)

4:20 PM The ESSnuSB Target Station - Piotr Cupial (AGH University of Science and Technology, Krakow, Poland)
5:00 PM
5:00 PM - 7:20 PM
Contributions

5:00 PM Targets for the SPES project and its applications: material selection and release simulations - Michele Ballan (INFN-LNL)

5:10 PM Fluidised Tungsten Powder Studies at Rutherford Appleton Laboratory - Dan Wilcox (RAL)

5:20 PM Exploratory study for the production of Sc beams at the ISOL facility of MYRRHA - Martin Ashford (SCK•CEN)

5:30 PM Microstructural Characterization of Proton-Irradiated Ti-15V-3Cr-3Sn-3Al and SiC-Coated Graphite - David Senor (Pacific Northwest National Laboratory)

5:40 PM Last updates of the R&D activities for the redesign of the CERN’s AD-Target - Marco Calviani (CERN)

5:50 PM Improvised electrsopinning set up for mass producing thicker ceramic nanofiber mat for high power targets - Sujit Bidhar (FNAL)

6:00 PM HiRadMat: A Unique Facility Testing Materials with High Power Pulsed Beam - Fiona Harden (CERN)

6:10 PM Energy deposition in Candidate Materials for the Whole-Beam Dumps for the Advanced Photon Source Upgrade - Jeff Dooling (Argonne National Laboratory/Advanced Photon Source)

6:20 PM Ion irradiation damage in commercially pure Titanium and Ti-6Al-4V: Characterization of the microstructure and mechanical properties - AIDA Amroussia (MICHIGAN STATE UNIVERSITY)

6:30 PM Diffusion of tritium produced in a graphite and SiC target - Naritoshi Kawamura (KEK/J-PARC)

6:40 PM Status of large area disk target development for ISOL facility of RAON - MIJOUNG JOUNG (IBS)

6:50 PM Thermal Simulations method for rotated target - Matthieu Michel (CNRS-GANIL)

7:00 PM Design of the Future High Energy Beam Dump for the CERN SPS - Antonio Perillo-Marcone (CERN)
Wednesday, June 6, 2018

8:50 AM

8:50 AM - 9:00 AM
9:00 AM M. Calviani / C. Densham
M. Calviani / C. Densham
9:00 AM - 9:40 AM
Contributions

9:00 AM Mark IV Upper Target Design for the Lujan Center 1L Target at LANSCE - Keith Woloshun (LANL)

9:20 AM In-situ studies of phase transition related Pb transport in the SINQ target rods with use of the NEUTRA imaging instrument at PSI - Sergejs Dementjevs (Paul Scherrer Institut)
9:40 AM Session 4 discussion
Session 4 discussion
9:40 AM - 10:00 AM

10:00 AM Coffee Break
Coffee Break
10:00 AM - 10:20 AM
Room: 1300 FRIB Lobby
10:20 AM A. Perillo Marcone / D. Winder
A. Perillo Marcone / D. Winder
10:20 AM - 12:00 PM
Contributions

10:20 AM Neutron Source Manufacturing at SNS - Peter Rosenblad (Oak Ridge National Laboratory)

11:00 AM Detailed design, prototyping activities and beam irradiation tests for the new n_TOF neutron spallation target - Marco Calviani (CERN)

11:20 AM Progress with manufacturing the first target module for ISIS TS1 Project - Leslie Jones (ISIS Synchrotron)

11:40 AM Measuring Residual Strain after Hot Isostatic Pressing of ISIS Target Plates - Dan Wilcox (RAL)
12:00 PM Session 6 discussion
Session 6 discussion
12:00 PM - 12:20 PM

12:20 PM Lunch Break
Lunch Break
12:20 PM - 1:20 PM

1:20 PM FRIB Tour
FRIB Tour
1:20 PM - 3:00 PM

3:00 PM Buffer
Buffer
3:00 PM - 3:20 PM

3:20 PM Coffee Break
Coffee Break
3:20 PM - 3:50 PM
3:50 PM T. Naoe / Y.J. Lee
T. Naoe / Y.J. Lee
3:50 PM - 5:30 PM
Contributions

3:50 PM Design of high temperature ISOL targets - Mattia Manzolaro (INFN-LNL)

4:30 PM Design and prototyping of the CERN Proton Synchrotron Internal Dump in the Framework of the LHC Injectors Upgrade Project - Francois-Xavier Nuiry (CERN)

4:50 PM Handling, Storage, & Disposal of Neutrino Beam Components at Fermilab - Cory Crowley (Fermi National Accelerator Lab)

5:10 PM High Power ISOL Target Remote Handling Developments at TRIUMF - Grant Minor (TRIUMF)
5:30 PM Session 5 discussion
Session 5 discussion
5:30 PM - 5:50 PM
Thursday, June 7, 2018

8:50 AM

8:50 AM - 9:00 AM
Room: 1200 FRIB Building
9:00 AM T. Naoe / Y.J. Lee
T. Naoe / Y.J. Lee
9:00 AM - 10:20 AM
Contributions

9:00 AM Beam Dump Facility (BDF) at CERN radiological and environmental assessment - Heinz Vincke (CERN)

9:20 AM Design and development of Super-FRS target area components and remote handling - Faraz Amjad (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

9:40 AM SNS Hot Cell Design Philosophy - Michael Dayton (ORNL-SNS)

10:00 AM Design and Operation of the Mu2e Target Remote Handling System - Michael Campbell (FNAL)
10:20 AM Coffee Break
Coffee Break
10:20 AM - 10:50 AM
Room: 1300 FRIB Lobby
10:50 AM T. Naoe / Y.J. Lee
T. Naoe / Y.J. Lee
10:50 AM - 12:30 PM
Contributions

10:50 AM Preliminary design study of the integration and remote handling processes for the Beam Dump Facility Target Complex - Keith Kershaw (CERN)

11:10 AM ISIS Second Target Station 2 Extracted Proton Beam Window Replacement - DAN COATES (STFC\UKRI\RAL\ISIS)

11:30 AM An engineering review of the ISIS facility extracted proton beam windows. - Daniel Blanco Lopez (UKRI/STFC, RAL, ISIS)

11:50 AM SNS Core Vessel Water Leak Saga - Michael Dayton (ORNL-SNS)
12:30 PM Lunch Break
Lunch Break
12:30 PM - 1:30 PM
1:30 PM H. Okuno / C. Stodel
H. Okuno / C. Stodel
1:30 PM - 3:10 PM
Contributions

1:30 PM Radiation Protection at CERN - learn from the past and prepare for the future - Heinz Vincke (CERN)

2:10 PM Spallation Neutron Source Status Update - Bernard Riemer (Oak Ridge National Laboratory)

2:30 PM Commissioning of Gas Injection at SNS - Charlotte Barbier (ORNL)

2:50 PM Development of High-Radiation-Tolerant Fiber-Optic Sensors for SNS Mercury Target Strain Measurement - Yun Liu (Oak Ridge National Laboratory)
3:10 PM Coffee Break
Coffee Break
3:10 PM - 3:40 PM
Room: 1300 FRIB Lobby
3:40 PM H. Okuno / C. Stodel
H. Okuno / C. Stodel
3:40 PM - 5:40 PM
Contributions

3:40 PM Analysis and Operational Feedback on the Current High Energy Beam Dump in the CERN SPS - Antonio Perillo-Marcone (CERN)

4:00 PM Targets for S3: design, fabrication and control under irradiation - Christelle STODEL (Grand Accélérateur National d'Ions Lourds)

4:20 PM Perspective of muon production target at J-PARC MLF MUSE - Shunsuke Makimura (J-PARC/KEK)

4:40 PM Target system maintenance experience in hot cell at J-PARC - Takashi Naoe (Japan Atomic Energy Agency)
5:40 PM Tranport to Workshop Banquet
Tranport to Workshop Banquet
5:40 PM - 6:30 PM

6:30 PM Workshop Banquet
Workshop Banquet
6:30 PM - 9:30 PM
Room: Michigan Princess

9:30 PM Transport to select hotels
Transport to select hotels
9:30 PM - 10:30 PM
Friday, June 8, 2018

8:50 AM

8:50 AM - 9:00 AM
Room: 1200 FRIB Building
9:00 AM W.Mittig / T. Stora
W.Mittig / T. Stora
9:00 AM - 10:20 AM
Contributions

9:00 AM Isotope Harvesting at FRIB - Gregory Severin (Facility for Rare Isotope Beams)

9:40 AM High Power Liquid Lead-bismuth Targetry for Intense Fast Neutron Sources Using a Superconducting Electron Linac - Mayir Mamtimin (Niowave Inc.)

10:00 AM Compact Sealed lithium target for accelerator-driven BNCT system - Kazuki Tsuchida (Nagoya University)
10:20 AM Coffee Break
Coffee Break
10:20 AM - 10:50 AM
Room: 1300 FRIB Lobby
10:50 AM W.Mittig / T. Stora
W.Mittig / T. Stora
10:50 AM - 11:30 AM
Contributions

10:50 AM Physics Beyond Colliders at CERN - Mike Lamont (CERN)
11:30 AM

11:30 AM - 12:30 PM

12:30 PM Lunch - Box lunches
Lunch - Box lunches
12:30 PM - 1:30 PM