ERDC CSRF Development Meeting II

US/Central
Spark Chamber (OTE)

Spark Chamber

OTE

document

ERDC CSRF Development Meeting II (14 Nov 2017)

Vertical cryostat for ERDC accelerator

Ram Dhuley

Date: November 14, 2017

Attendees: Ivan Gonin, Nikolay Solyak, Sergey Kazakov, Vyacheslav Yakovlev, Timergali Khabiboulline, Tom Nicol, Bob Kephart, Mike Geelhoed, Ram Dhuley

Discussion

  1. Ram Dhuley presented the revised activity list planned for FY18. Design of cavity interfaces with RF gun and power coupler are focus areas.
  2. Ivan Gonin discussed revisions to the vertical cryostat.
  3. Sergey Kazakov presented options for the power coupler; straight-through coupler is more feasible than a right-angled.

Action items (red = priority)

  1. Order 1.5 cell gun cavity by March 1, 2018
  1. Slava + Timer to handle procurement. Timer to prepare material list and cost estimate for 2 x 1.5 cell cavities,
  2. Slava emphasized on HOM analysis of cavities
  3. Ivan + Timer to work on RF gun and it’s interface with cavity. Ivan to begin by scaling the PAVAC 650 MHz gun (250 mA) for ERDC accelerator,
  4. Sergey Kazakov to proceed with the design of straight-through coupler and it’s interface with cavity.
  1. Continue with the cryostat preliminary design
  1. Ivan + Ram to continue with the CAD design; add 4.5 cell cavity with Oleg Prokofiev’s cooling rings; add RF coupler port for 1.5 cell cavity.
  2. Tom Nicol + Ram to conceptualize cavity and shield support structure
  3. Tom Nicol to further look in to shut-off valve at the outlet beamline

 

 

There are minutes attached to this event. Show them.
    • 09:00 09:20
      Ram's Presentation 20m
      Speaker: Dr Ram Dhuley (Fermilab)