Name: INTDS Conference 2018
Start: 2018-10-08T08:00:00-04:00
End: 2018-10-12T19:00:00-04:00
Location: Facility for Rare Isotope Beams

Monday, October 8, 2018

8:00 AM

8:00 AM - 8:50 AM

8:50 AM

8:50 AM - 9:00 AM
9:00 AM
9:00 AM - 9:30 AM
Room: 1200 Lecture Hall
Contributions

9:00 AM Welcome to INTDS
9:30 AM

9:30 AM - 9:40 AM
Room: 1200 Lecture Hall
9:40 AM
9:40 AM - 10:40 AM
Room: 1200 Lecture Hall
Contributions

9:40 AM Construction Status of the FRIB Lithium Charge Stripper - Takuji Kanemura (Facility for Rare Isotope Beams, Michigan State University)

10:20 AM Investigation of Charge Strippers for High Intensity Uranium Ions - Hironori Kuboki (J-PARC Center, High Energy Accelerator Research Organization (KEK))
10:40 AM Coffee Break
Coffee Break
10:40 AM - 11:10 AM
11:10 AM
11:10 AM - 12:10 PM
Room: 1200 Lecture Hall
Contributions

11:10 AM Progress Status of Fabrication of Stripper Foils for 3 GeV RCS of J-PARC in Tokai-site - Masahiro Yoshimoto (Japan Atomic Energy Agency / J-PARC center)

11:30 AM Measurement of Radio-activation and Evaluation of Activated Nuclides due to Secondary Particles Produced in Stripper Foil in J-PARC RCS. - Masahiro Yoshimoto (Japan Atomic Energy Agency / J-PARC center)

11:50 AM Measurements with the Stripping Foil Test Stand in the Linac4 Transfer Line - Wilhelmus Weterings (CERN)
12:10 PM

12:10 PM - 12:30 PM

12:30 PM Lunch Break
Lunch Break
12:30 PM - 1:30 PM
1:30 PM
1:30 PM - 3:10 PM
Room: 1200 Lecture Hall
Contributions

1:30 PM Graphene Stripper Foils for Nuclear Physics Research and Medical Isotope Cyclotrons - Richard Fink (Applied Nanotech Inc.)

1:50 PM Contact Free Measurement of Carbon Stripper Foil Thickness Variation for IsoDAR Experiments - Rugard Dressler (Paul Scherer Institute)

2:10 PM Development of High-density Highly Oriented Graphite Stripper - Hiroo Hasebe (RIKEN)

2:30 PM Meeting the Needs of a Growing Stripper Foil Community with a Dedicated User Forum - Constance Stoner (Arizona Carbon Foil Co., Inc. ACF-Metals)

2:50 PM The Irradiation Study of Multilayer Carbon Stripper Foils by Ar Beam - Wen Jiang (Purdue Univeristy)
3:10 PM Coffee Break
Coffee Break
3:10 PM - 3:40 PM
3:40 PM
3:40 PM - 5:20 PM
Room: 1200 Lecture Hall
Contributions

3:40 PM Methods of Targets’ Characterization - Christelle STODEL (Grand Accélérateur National d'Ions Lourds)

4:20 PM Microstructured Targets for Enhanced X-Ray and Particle Emission – Fabrication and Characterization - Gabriel Schaumann (Technische Universität Darmstadt)

4:40 PM Surface and Thickness Measurement in the Targetlab of GSI - Birgit Kindler (GSI Helmholtz Centre for Heavy-Ion Research)
Tuesday, October 9, 2018

8:00 AM

8:00 AM - 8:50 AM

8:50 AM

8:50 AM - 9:00 AM
Room: 1200 Lecture Hall
9:00 AM
9:00 AM - 10:20 AM
Room: 1200 Lecture Hall
Contributions

9:00 AM An Overview of Target Fabrication at LLNL - Suhas Bhandarkar (Lawrence Livermore National Laboratory)

9:40 AM Progress on Fabricaion of Glow Discharge Polymer Shells as ICF targets at CAEP - Xiaoshan He (Research Center of Laser Fusion, China Academy of Engineering Physics)

10:00 AM The Study of Fabrication High Z coatings by Magnetron Sputtering for ICF Target - Yansong LIU (Research Center of Laser Fusion, China Academy of Engineering Physics)
10:20 AM Coffee Break
Coffee Break
10:20 AM - 10:50 AM
10:50 AM
10:50 AM - 12:10 PM
Contributions

10:50 AM A Progress on Nanostructured Array Targets in Nano-plasmas Research - Xibo Li (Science and Technology on Plasma Physics Laboratory, Research Center of Laser Fusion, China Academy of Engineering Physics)

11:10 AM Recent Advances in Transcurium Actinide Target Production at Oak Ridge National Laboratory - Kristian Myhre (Oak Ridge National Laboratory)

11:30 AM Target Preparation for Nuclear Chemistry Experiments at Los Alamos National Laboratory - Evelyn Bond (Los Alamos National Laboratory)

11:50 AM Preparing Enriched Stable Isotope Targets at Oak Ridge National Laboratory - Mike Zach (Oak Ridge National Laboratory)
12:10 PM

12:10 PM - 12:30 PM

12:30 PM Lunch Break
Lunch Break
12:30 PM - 1:30 PM
1:30 PM
1:30 PM - 3:10 PM
Contributions

1:30 PM Manufacturing and Characterization of Targets in IFIN-HH: Developing an Interdisciplinary Body of Knowledge - Andreea Mitu (IFIN-HH)

2:10 PM Preventing Damage to Floating Foils Caused by Rayleigh-Taylor Instabilities - John, Jr. Stoner (ACF-Metals)

2:30 PM The Synthesis of Deuterated Polyethylene Targets - ntombizonke kheswa (iThemba LABS)

2:50 PM Encapsulated Sulfur Targets - ntombizonke kheswa (iThemba LABS)
3:10 PM Coffee Break
Coffee Break
3:10 PM - 3:40 PM
3:40 PM
3:40 PM - 4:40 PM
Contributions

3:40 PM Preparation and Characterization of 10B Targets at JRC-Geel - David Vanleeuw (European Commission JRC-Geel)

4:00 PM Uranium-Targets for Heavy-ion Accelerators - Bettina Lommel (GSI Helmholtzzentrum für Schwerionenforschung)

4:20 PM Radium Targets for the Reactor Production of Alpha-emitting Medical Radioisotopes - Roy Copping (Oak Ridge National Laboratory)
Wednesday, October 10, 2018

8:00 AM

8:00 AM - 8:50 AM
9:00 AM
9:00 AM - 10:20 AM
Contributions

9:00 AM Production and Distribution of Isotopically Enriched and Radioactive Isotopes for Research - Daniel Stracener (Oak Ridge National Laboratory)

9:40 AM The Argonne Target Library - John Greene (Argonne National Laboratory)

10:00 AM Method Development for Producing Thin 14C Foils - Matthew Gott (Argonne National Laboratory)
10:20 AM Coffee Break
Coffee Break
10:20 AM - 10:50 AM
10:50 AM Session 3 - Isotopically enriched and radioactive targets
Session 3 - Isotopically enriched and radioactive targets
10:50 AM - 11:50 AM
Contributions

10:50 AM Target Preparation for Neutron-induced Cross-section Experiments - Goedele Sibbens (EC JRC-Geel)

11:10 AM Production and Characterization of Rare Isotopes Targets at PSI: Present Status and Future Prospects - Emilio Andrea Maugeri (Paul Scherrer Institut)

11:30 AM AT3PC: Active Tritium Target TPC. Conceptual design of a novel Time Projection Chamber detector for reactions using tritium - Yassid Ayyad (MSU-FRIB)
11:50 AM Session 6-Cryogenic and Poarized Targets
Session 6-Cryogenic and Poarized Targets
11:50 AM - 12:10 PM
Contributions

11:50 AM Extrusion of Hydrogen Ice for Thin Targets - Alain Gillibert (CEA/IRFU/SPhN)
12:10 PM Buffer
Buffer
12:10 PM - 12:30 PM

12:30 PM Excursion - Henry Ford and Greenfield Village
Excursion - Henry Ford and Greenfield Village
12:30 PM - 5:05 PM

5:05 PM Transportation to the Banquet
Transportation to the Banquet
5:05 PM - 6:00 PM

6:00 PM Banquet - Detroit Princess
Banquet - Detroit Princess
6:00 PM - 9:00 PM

9:00 PM Return to Hotel
Return to Hotel
9:00 PM - 11:00 PM
Thursday, October 11, 2018

8:00 AM

8:00 AM - 8:40 AM

8:40 AM

8:40 AM - 8:50 AM
Room: 1200 Lecture Hall
8:50 AM
8:50 AM - 9:50 AM
Room: 1200 Lecture Hall
Contributions

8:50 AM Use of Ion Irradiation to Emulate Radiation Damage in Reactor Core Materials - Gary WAS (University of Michigan)

9:30 AM High power beam dump drum for FRIB primary beam: challenge and solutions - Frederique Pellemoine (Michigan State University - Facility for Rare Isotope Beams)
9:50 AM

9:50 AM - 10:00 AM

10:00 AM

10:00 AM - 12:00 PM

12:00 PM

12:00 PM - 12:10 PM

12:10 PM Lunch Break
Lunch Break
12:10 PM - 1:10 PM

1:10 PM

1:10 PM - 2:40 PM

2:40 PM Coffee Break
Coffee Break
2:40 PM - 3:10 PM
3:10 PM
3:10 PM - 4:30 PM
Room: 1200 Lecture Hall
Contributions

3:10 PM Operational Experience of the High-power Production Target System for BigRIPS Separator - Yoshiyuki Yanagisawa (RIKEN Nishina center)

3:30 PM Thermal Model Simulation of the High Power Target System for BigRIPS Separator - Koichi Yoshida (RIKEN Nishina Center)

3:50 PM “Thermal Spike” Model Applied to Thin Targets Irradiated with Heavy Ion Beams at Low Energy - Christelle STODEL (Grand Accélérateur National d'Ions Lourds)

4:10 PM Multi-jet Gas Cooling of In-beam Foils or Specimens: CFD Predictions of the Convective Heat-transfer Coefficient (LA-UR-18-27366) - Christiaan Vermeulen (Los Alamos National Laboratory)
Friday, October 12, 2018

8:00 AM

8:00 AM - 8:50 AM

8:50 AM

8:50 AM - 9:00 AM
Room: 1200 Lecture Hall
9:00 AM
9:00 AM - 10:20 AM
Contributions

9:00 AM An Isotope Harvesting Beam-dump for the NSCL - Gregory Severin (Michigan State University)

9:40 AM Rhenium and Iridium Targets Prepared Using a Novel Graphene Loading Technique - John Greene (Argonne National Laboratory)

10:00 AM Second Generation Degrader Foil for the CARIBU Project - Matthew Gott (Argonne National Laboratory)
10:20 AM Coffee Break
Coffee Break
10:20 AM - 10:40 AM
10:40 AM Session 6: Targets for special application (medical, industrial, controlled fusion
Session 6: Targets for special application (medical, industrial, controlled fusion
10:40 AM - 11:40 AM
Contributions

10:40 AM Medical Isotope Collection from ISAC Targets - Peter Kunz (TRIUMF)

11:00 AM Calcium Targets for Production of the Medical Sc Radioisotopes in Reactions with p, d or α Projectiles - Anna STOLARZ (Heavy Ion Laboratory, University of Warsaw)
11:40 AM

11:40 AM - 12:00 PM

12:00 PM Lunch Break
Lunch Break
12:00 PM - 12:40 PM

12:40 PM

12:40 PM - 3:40 PM