Name: TMS Detector and Readout Preliminary Design Review
Start: 2025-02-04T09:00:00-06:00
End: 2025-02-05T12:30:00-06:00
Location: No location set

TMS Detector and Readout Preliminary Design Review

from Tuesday, 4 February 2025 (09:00) to Wednesday, 5 February 2025 (12:30)

Monday, 3 February 2025
Tuesday, 4 February 2025
09:00 Physics Requirements and Detector Parameters - Hugh Gallagher (Tufts University)
Physics Requirements and Detector Parameters
- Hugh Gallagher (Tufts University)
09:00 - 09:45
Motivate overall configuration of TMS: 3.6m x 7.46m area for detectors, bar width and length, steel tjickness pattern and total steel length, timing resolution.
09:45 Simulated Perfomance of TMS - Jeffrey Kleykamp (University of Mississippi)
Simulated Perfomance of TMS
- Jeffrey Kleykamp (University of Mississippi)
09:45 - 10:15
10:15 Break
Break
10:15 - 10:30
10:30 Detector Design - Andrew Furmanski
Detector Design
- Andrew Furmanski
10:30 - 11:15
Detector width and height, cassette concept, external 8-fiber connector connected to mating block w/ 8 SiPM PCB. 10 wire connector with LED and temperature measurement.
11:15 Detector and Cassette Mechanical Design - Julianna Abel (University of Minnesota)
Detector and Cassette Mechanical Design
- Julianna Abel (University of Minnesota)
11:15 - 12:00
Include prototyping plan and QA/QC procedures for detectors and cassettes.
12:00 Lunch
Lunch
12:00 - 13:00
13:00 Front End Electronic System - Thomas Kutter (LSU)
Front End Electronic System
- Thomas Kutter (LSU)
13:00 - 13:45
Describe CAEN A5202 front end and DT5215 back end systems, expected performance
13:45 Front End System Configuration and Powering - Vittorio Paolone (University of Pittsburgh)
Front End System Configuration and Powering
- Vittorio Paolone (University of Pittsburgh)
13:45 - 14:15
LV distribution, grounding considerations, fringe field concerns.
14:15 Detector and Cassette Assembly Plan - Mayly Sanchez (Florida State University)
Detector and Cassette Assembly Plan
- Mayly Sanchez (Florida State University)
14:15 - 14:45
Procurements required, assembly steps, assembly throughput, 2-factory plan.
14:45 Break
Break
14:45 - 15:00
15:00 Schedule, Installation Plan, Budget - Thomas Markiewicz (SLAC)
Schedule, Installation Plan, Budget
- Thomas Markiewicz (SLAC)
15:00 - 16:00
16:00 Discussion and Q & A
Discussion and Q & A
16:00 - 16:30

16:30 Review Committee Deliberations
Review Committee Deliberations
16:30 - 17:00
Wednesday, 5 February 2025

09:00 Response to Questions
Response to Questions
09:00 - 10:00

10:00 Preliminary Report Writing by Review Committee
Preliminary Report Writing by Review Committee
10:00 - 12:00

12:00 Closeout
Closeout
12:00 - 12:30