Name: TMS Detector and Readout Preliminary Design Review
Start: 2025-02-10T09:00:00-06:00
End: 2025-02-11T12:30:00-06:00
Location: No location set

TMS Detector and Readout Preliminary Design Review

from Monday, 10 February 2025 (09:00) to Tuesday, 11 February 2025 (12:30)

Monday, 10 February 2025
09:00 Physics Requirements and Detector Parameters - Hugh Gallagher (Tufts University)
Physics Requirements and Detector Parameters
- Hugh Gallagher (Tufts University)
09:00 - 09:45
Motivate overall configuration of TMS: 3.6m x 7.46m area for detectors, bar width and length, steel thjickness pattern and total steel length, timing resolution. 30 min. talk, 15 min questions.
09:45 Schedule, Installation Plan, Budget - Thomas Markiewicz (SLAC)
Schedule, Installation Plan, Budget
- Thomas Markiewicz (SLAC)
09:45 - 10:15
10:15 Break
Break
10:15 - 10:30
10:30 Detector Design - Andrew Furmanski
Detector Design
- Andrew Furmanski
10:30 - 11:15
Cover physics aspects of detector as Andrew Sutton did in the first internal review. Choice of bar length and width, detector width and height, cassette concept, external 8-fiber connector connected to mating block w/ 8 SiPM PCB. 10 wire connector with LED and temperature measurement. 40 min talk, 20 min for questions.
11:15 Front End Electronic System - Thomas Kutter (LSU)
Front End Electronic System
- Thomas Kutter (LSU)
11:15 - 12:00
Describe CAEN A5202 front end and DT5215 back end systems, expected performance
12:00 Lunch
Lunch
12:00 - 13:00
13:00 Detector and Cassette Mechanical Design - Julianna Abel (University of Minnesota)
Detector and Cassette Mechanical Design
- Julianna Abel (University of Minnesota)
13:00 - 13:45
Include prototyping plan and QA/QC procedures for detectors and cassettes.
13:45 Module Prototyping Plans - Andrew Furmanski
Module Prototyping Plans
- Andrew Furmanski
13:45 - 14:00
14:00 Detector and Cassette Assembly Plan - Mayly Sanchez (Florida State University)
Detector and Cassette Assembly Plan
- Mayly Sanchez (Florida State University)
14:00 - 14:30
Procurements required, assembly steps, assembly throughput, 2-factory plan.
14:30 Front End System Configuration and Powering - Vittorio Paolone (University of Pittsburgh)
Front End System Configuration and Powering
- Vittorio Paolone (University of Pittsburgh)
14:30 - 15:00
LV distribution, grounding considerations, fringe field concerns.
15:00 Break
Break
15:00 - 15:15

15:15 Discussion and Q & A
Discussion and Q & A
15:15 - 16:00

16:00 Review Committee Deliberations
Review Committee Deliberations
16:00 - 17:00
Tuesday, 11 February 2025

09:00 Response to Questions
Response to Questions
09:00 - 10:00

10:00 Preliminary Report Writing by Review Committee
Preliminary Report Writing by Review Committee
10:00 - 12:00

12:00 Closeout
Closeout
12:00 - 12:30