18–20 May 2015
National Superconducting Cyclotron Laboratory
US/Michigan timezone
Registration deadline Sunday, 9 May!

Photodisintegration measurement using MAIKo

19 May 2015, 12:30
25m
Lecture Hall (National Superconducting Cyclotron Laboratory)

Lecture Hall

National Superconducting Cyclotron Laboratory

640 South Shaw Lane East Lansing, MI 48824
Oral Presentation Physics and Experiments Session 6

Speaker

motoki murata (Department of physics kyoto university)

Description

The photodisintegration of 4He have been extensively studied both from the experimental and theoretical aspects. The photodisintegration is mainly caused by an electric-dipole transition to the giant dipole resonance and the subsequent decay. This process is deeply related to the nucleosynthesis in the universe, therefore, it is very important from a view of astrophysics as well as nuclear physics. However, the experimental situation for this reaction is not satisfactory. Although much effort was devoted to measure the cross section for the photodisintegration reaction in 4He over the last four decades, the experimental data contradict each other, and new reliable experimental data are desired. The active target is quite suitable to the photodisintegration measurement because it covers a large solid angle for charged particles emitted from the photonuclear reaction. Moreover, there is no limitation from the beam counting rate, which is the destined difficulty for the active target, because the active target is almost insensitive to gamma rays. Recently, the active target MAIKo, which is jointly developed by Kyoto and RCNP, was successfully employed to measure the photodisintegration cross section for 4He. In the present talk, the details of the experimental setup and results will be reported.

Primary author

Prof. Takahiro KAWABATA (Department of Physics, Kyoto University)

Co-authors

Mr Tatsuya Furuno (Department of Physics, Kyoto University) motoki murata (Department of physics kyoto university)

Presentation materials

There are no materials yet.