Medical Device Sterilization Workshop 2023: Past, Present, and Future
from
Wednesday, 20 September 2023 (00:00)
to
Thursday, 21 September 2023 (23:59)
Monday, 18 September 2023
Tuesday, 19 September 2023
Wednesday, 20 September 2023
08:00
Hybrid
Hybrid
08:00 - 12:15
Safety/Logistics
Safety/Logistics
08:00 - 08:05
08:05
Welcome - Bonnie Fleming, Deputy Director for Science and Technology, FNAL
Welcome - Bonnie Fleming, Deputy Director for Science and Technology, FNAL
08:05 - 08:15
08:15
Keynote - Nick Butler, NNSA
Keynote - Nick Butler, NNSA
08:15 - 09:00
Nick Butler, the Deputy Director of the National Nuclear Security Administration’s Office of Radiological Security (ORS), provides an overview of the office’s mission to enhance U.S. and global security by preventing high-activity radioactive materials from being used in acts of terrorism. As part of this mission, ORS promotes the use of non-radioisotopic alternative technologies through research, outreach, education, and complete device replacements in order to reduce global reliance on high-risk radioisotopes in medical, research, and industrial applications. Within the realm of medical device sterilization, ORS supports academia and industry partners by funding research, including through the key collaborative effort of “Team Nablo.” ORS supports and communicates advancements in technology and listens to industry needs and concerns through outreach activities such as the inaugural ORS Industry Day and annual Fermi Medical Device Sterilization Workshops.
09:00
Medium-energy, Low-power Needs - Ilia Geltser, Terumo BCT
Medium-energy, Low-power Needs - Ilia Geltser, Terumo BCT
09:00 - 09:40
09:40
Packaging & Sterilization - Kiip, Srun & Blom
Packaging & Sterilization - Kiip, Srun & Blom
09:40 - 10:20
It is known that radiation sterilization can result in degradation of certain materials, and of particular concern is molecular changes to the polymers. Because of this, aging studies are typically required for most medical devices and their packaging. However, even though most packaging materials have been well characterized and studied, and there are no known cases where packaging has failed due to shelf life concerns, most medical device companies spend significant time and resources to perform aging studies on their product and packaging. It is known that the presence of antioxidants in a polymer formulation inhibits the degradation that can occur after exposure to radiation. Instead of focusing solely on performing aging studies on every device and packaging combination, we are proposing an alternative approach where device manufacturers could characterize and test their materials for the presence of anti-oxidants as a predictor of material degradation over time. In addition to discussing the science behind this topic, we will also be discussing how we plan to use effective means of collaboration to achieve our goals.
10:20
Coffee Break - 20 minutes
Coffee Break - 20 minutes
10:20 - 10:40
10:40
International Regulatory Panel - ANVISA, FDA, Health Canada, and TÜV-SÜD
International Regulatory Panel - ANVISA, FDA, Health Canada, and TÜV-SÜD
10:40 - 11:20
including: ANVISA, FDA, Health Canada, and TÜV-SÜD
11:20
The evolution of a standard - AAMI TIR104 and beyond, Emily Craven, Boston Scientific
The evolution of a standard - AAMI TIR104 and beyond, Emily Craven, Boston Scientific
11:20 - 12:15
This presentation looks at the drivers behind the creation of industry guidance on the transfer of health care products between radiation sterilization sources. Some information existed within ISO 11137-1 but it was unclear and incomplete. In the process of writing TIR104, the AAMI radiation sterilization working group collaborated to clarify a process to follow when assessing the transfer of doses. An overview of this framework will be presented. The resulting document and data that was published in support of this new guidance has significantly influenced the next revision of ISO 11137-1. We will examine the path forward once ISO 11137-1:2023 is published and which next steps will be of greatest benefit to our industry.
12:15
Morning Wrap-up & Close of Virtual Session
Morning Wrap-up & Close of Virtual Session
12:15 - 12:20
12:20
Lunch Break - 70 Minutes
Lunch Break - 70 Minutes
12:20 - 13:30
13:30
In-Person Session
In-Person Session
13:30 - 17:30
Discussion - TIR 104 - Mark Pasmore, Mara Senescu, Baxter
Discussion - TIR 104 - Mark Pasmore, Mara Senescu, Baxter
13:30 - 14:30
14:30
Discussion - FDA Panel
Discussion - FDA Panel
14:30 - 15:30
15:30
Coffee Break - 30 minutes
Coffee Break - 30 minutes
15:30 - 16:00
16:00
Discussion - Risk Evaluations in Implementing X-ray for Single-Use Systems Sterilization, Samuel Dorey, Sartorius
Discussion - Risk Evaluations in Implementing X-ray for Single-Use Systems Sterilization, Samuel Dorey, Sartorius
16:00 - 17:00
The single-use disposable technologies for biopharmaceutical manufacturing combine single-use holistic processes and facility strategy to overcome scale limitations and enable cost-efficient manufacturing to support the growing demand for many biologics. This industry is facing challenges with irradiation sterilization capacity resulting in assessing X-rays as a suitable and equivalent alternative to gamma. Comparative studies between the effects of different types of radiation and their health impact on the materials/products studied arise. The Bioprocess Systems Alliance (BPSA) published a consensus risk-based qualification approach including materials, physical, functional, chemical, and biological investigation to assess the impact of X-ray vs gamma. The Team Nablo project also proposed a holistic research approach covering several disciplines. To achieve its goals, the team has integrated technological, academic, and industrial research. The BioPhorum X-ray workstream will also publish Guidance for risk evaluation of X-ray irradiation of single-use systems. This will be providing a robust, consistent, and repeatable methodology to assess the inclusion of X-ray irradiation of previously gamma irradiated-treated single-use products. We then propose an insight in the different risk evaluations available currently to simplify the adoption of X-ray for the sterilization purpose.
17:00
Close of Day 1
Close of Day 1
17:00 - 17:30
17:30
No-host Social - Two-Brothers Roundhouse
No-host Social - Two-Brothers Roundhouse
17:30 - 20:30
Thursday, 21 September 2023
08:00
Hybrid Session
Hybrid Session
08:00 - 12:30
Welcome
Welcome
08:00 - 08:10
08:10
Microbiological Resistance / Population C, Martell Winters, Nelson Labs
Microbiological Resistance / Population C, Martell Winters, Nelson Labs
08:10 - 08:50
Population C, also called the Standard Distribution of Resistances (SDR), has been the microbiological benchmark for radiation sterilization since the early 1980s. The development of the SDR should be understood by industry and it provides insights into how the SDR, and associated dosing tables, can be used when investigating sterilization dose establishment or dose audit failures and aberrant bioburden data. Also, analysis of the SDR reveals a potential Achilles heel which is currently being discussed in the industry and is prompting additional guidance that is being proposed in the review of ISO 11137-1.
08:50
Training - Beyond Read and Learn, Vu LeKate (Abbott), Kim Patton (PRI)
Training - Beyond Read and Learn, Vu LeKate (Abbott), Kim Patton (PRI)
08:50 - 09:30
09:30
Training Resources - John Williams, Medtronic
Training Resources - John Williams, Medtronic
09:30 - 09:50
09:50
Finding the optimal sterilization configuration using simulations - Funk & Badali, Triple Ring
Finding the optimal sterilization configuration using simulations - Funk & Badali, Triple Ring
09:50 - 10:30
The dose delivered during radiation sterilization is highly dependent on many factors, such as the orientation of the device relative to the beam, how the devices are arranged in the shipping box, and how devices are positioned within their packaging. Experimentally exploring this trade space to find the best sterilization configuration is a very expensive and time consuming process since it requires relying on trial-and-error measurements and rules-of-thumb. In this presentation, we use simulations to demonstrate that the dose delivered to even a very simple medical device can be strongly influenced by the factors listed above. Simulations offer a powerful way to optimize the sterilization configuration in silico, in order to improve the efficiency of the sterilization validation process.
10:30
Coffee Break - 20 Minutes
Coffee Break - 20 Minutes
10:30 - 10:50
10:50
Engaging with the FDA - Radiation Master File Pilot
Engaging with the FDA - Radiation Master File Pilot
10:50 - 11:20
Engaging with FDA: Radiation Master File Pilot, Submission Review, Responses, & Misconceptions This session will build on last year’s FDA mock Q-Submission session and cover several topics related to engaging with FDA. 1) The first topic will be an overview of FDA’s Radiation Sterilization Master File Pilot Program. This program was initiated in April 2023 to pilot a novel way for FDA to support sterilization changes to PMA approved devices such as changing from gamma or ethylene oxide sterilization to x-ray or e-beam sterilization. 2) Next, there will be a panel discussion of some common questions and things to consider when submitting a premarket submission to FDA for a sterilization change to a medical device. The panel discussion will continue for the last set of topics in the session: 3) responding to FDA requests for information during submission review and some common questions and misconceptions about this part of the premarket review process.
11:20
Engaging wiht the FDA - Submission Review
Engaging wiht the FDA - Submission Review
11:20 - 11:50
Engaging with FDA: Radiation Master File Pilot, Submission Review, Responses, & Misconceptions This session will build on last year’s FDA mock Q-Submission session and cover several topics related to engaging with FDA. 1) The first topic will be an overview of FDA’s Radiation Sterilization Master File Pilot Program. This program was initiated in April 2023 to pilot a novel way for FDA to support sterilization changes to PMA approved devices such as changing from gamma or ethylene oxide sterilization to x-ray or e-beam sterilization. 2) Next, there will be a panel discussion of some common questions and things to consider when submitting a premarket submission to FDA for a sterilization change to a medical device. The panel discussion will continue for the last set of topics in the session: 3) responding to FDA requests for information during submission review and some common questions and misconceptions about this part of the premarket review process.
11:50
Engaging with the FDA - Responses & Misconceptions
Engaging with the FDA - Responses & Misconceptions
11:50 - 12:20
Engaging with FDA: Radiation Master File Pilot, Submission Review, Responses, & Misconceptions This session will build on last year’s FDA mock Q-Submission session and cover several topics related to engaging with FDA. 1) The first topic will be an overview of FDA’s Radiation Sterilization Master File Pilot Program. This program was initiated in April 2023 to pilot a novel way for FDA to support sterilization changes to PMA approved devices such as changing from gamma or ethylene oxide sterilization to x-ray or e-beam sterilization. 2) Next, there will be a panel discussion of some common questions and things to consider when submitting a premarket submission to FDA for a sterilization change to a medical device. The panel discussion will continue for the last set of topics in the session: 3) responding to FDA requests for information during submission review and some common questions and misconceptions about this part of the premarket review process.
12:20
Morning Wrap-up & Close of Virtual Session
Morning Wrap-up & Close of Virtual Session
12:20 - 12:30
12:30
Lunch Break - 75 Minutes
Lunch Break - 75 Minutes
12:30 - 13:30
13:30
In-Person Session
In-Person Session
13:30 - 16:40
Discussion - Collaborating w/Kilmer/AAMI - FDA Collaborative Communities
Discussion - Collaborating w/Kilmer/AAMI - FDA Collaborative Communities
13:30 - 14:30
14:30
Networking
Networking
14:30 - 15:30
15:30
Coffee Break - 30 Minutes
Coffee Break - 30 Minutes
15:30 - 16:00
16:00
Networking
Networking
16:00 - 16:30
16:30
Close of Workshop
Close of Workshop
16:30 - 16:40