Name: 2018 High Power Targetry Workshop
Start: 2018-06-04T08:45:00-04:00
End: 2018-06-08T17:00:00-04:00
Location: No location set

2018 High Power Targetry Workshop

from Monday, 4 June 2018 (08:45) to Friday, 8 June 2018 (17:00)

Monday, 4 June 2018

08:50

08:50 - 09:10
09:10 Welcome Talk - Thomas Glasmacher
Welcome Talk
- Thomas Glasmacher
09:10 - 09:30
09:30 High Power Targetry at FRIB - Frederique Pellemoine (Michigan State University - Facility for Rare Isotope Beams)
High Power Targetry at FRIB
- Frederique Pellemoine (Michigan State University - Facility for Rare Isotope Beams)
09:30 - 09:50
09:50 C. Barbier / B. Riemer
C. Barbier / B. Riemer
09:50 - 10:50
Contributions

09:50 Optimization of the LBNF Neutrino Beam - Laura Fields

10:30 Beam Dump Facility target: design status, beam tests in 2018 and material studies - Edmundo Lopez Sola (CERN)
10:50 Coffee Break
Coffee Break
10:50 - 11:10
Room: 1300 FRIB Lobby
11:10 C. Barbier / B. Riemer
C. Barbier / B. Riemer
11:10 - 12:20
Contributions

11:10 RaDIATE thermal shock experiments at CERN’s HiRadMat facility - Kavin Ammigan (Fermi National Accelerator Laboratory)

11:30 Research of Materials in Target Environment at European Spallation Source - Yong Joong Lee (ESS)

11:50 A first integrated CERN-ISOLDE spallation source operated at 2000°C with GW instantaneous beam power for isotope production - J.P. Ramos (CERN)
12:20 Lunch Break
Lunch Break
12:20 - 13:20
13:20 C. Barbier / B. Riemer
C. Barbier / B. Riemer
13:20 - 14:20
Contributions

13:20 Tungsten Oxidation AeroSol Transport (TOAST) Experiments - Per Nilsson (European Spallation Source)

13:40 Measurements of Target Strain Mitigation by Gas Injection - Willem Blokland (ORNL)
14:20 P. Hurh / F. Pellemoine
P. Hurh / F. Pellemoine
14:20 - 15:20
Contributions

14:20 IAEA Activities in Support of the Accelerator Based Simulation and Modelling of Radiation Damage Effects - Danas Ridikas (IAEA)

15:00 FRIB Radiation Studies: Damage, Component Lifetimes, Hands-on Accessibility - Dali Georgobiani (FRIB/MSU)
15:20 Coffee Break
Coffee Break
15:20 - 15:50
Room: 1300 FRIB Lobby
15:50 P. Hurh / F. Pellemoine
P. Hurh / F. Pellemoine
15:50 - 17:30
Contributions

15:50 Investigation of radiation damage effect on advanced materials under different irradiation conditions - CARLOTTA ACCETTURA (Politecnico di Milano and CERN)

16:10 J-PARC neutrino beam-line and radiation damage studies on Titanium alloys - Taku Ishida (J-PARC/KEK)

16:30 The Influence of High Energy Proton Irradiation on Fine-Grained Isotropic Graphite Grades: A Summary of Recent RaDIATE Results - Patrick Hurh (FNAL)

16:50 Blister formation at subcritical doses in Tungsten irradiated by MeV protons - Inbal Gavish Segev (Soreq NRC)
17:30 Welcome Reception and Museum Visit
Welcome Reception and Museum Visit
17:30 - 21:30
Tuesday, 5 June 2018

08:50

08:50 - 09:00
Room: 1200 FRIB Building
09:00 Y. Dai / D. McClintock
Y. Dai / D. McClintock
09:00 - 10:20
Contributions

09:00 Techniques and Accomplishments of the Post Irradiation Examination Program at the Spallation Neutron Source - David McClintock (Oak Ridge National Laboratory)

09:40 Status Update of PIE Irradiated Materials from BLIP at PNNL - Andy Casella (PNNL)

10:00 Post-irradiation examinations of SINQ Target-11 - Yong Dai (Paul Scherrer Institute)
10:20 Coffee Break
Coffee Break
10:20 - 10:50
Room: 1300 FRIB Lobby
10:50 Y. Dai / D. McClintock
Y. Dai / D. McClintock
10:50 - 12:10
Contributions

10:50 Progress of specimen cutout and damage inspection for used mercury target vessel at J-PARC - Takashi Naoe (Japan Atomic Energy Agency)

11:10 NOVA Medium energy target ME-1 autopsy, procedure and equipment - Vladimir Sidorov (Fermilab)

11:30 Thermal diffusivity of proton and spallation neutron irradiated tungsten - Jemila Habainy (European Spallation Source ERIC)
12:10 Lunch Break
Lunch Break
12:10 - 13:10
13:10 M. Calviani / C. Densham
M. Calviani / C. Densham
13:10 - 15:10
Contributions

13:10 Operation of and Upgrade Plans for the LANSCE Pulsed Neutron Sources - Eric Pitcher (Los Alamos National Laboratory)

13:50 High-power converters for RIB production - Luca Egoriti (TRIUMF)

14:10 High power Beam dump for SARAF phase II - Eliyahu Ilan (Soreq Nuclear Research Center)

14:30 A high power density beam dump for ISOL@MYRRHA - Donald HOUNGBO (SCK-CEN)

14:50 High Power Capability of the Primary Beam Dump Drum for FRIB – Simulation and Experimental Study - Mikhail Avilov (FRIB Michigan State University)
15:10 Coffee Break
Coffee Break
15:10 - 15:40
15:40 M. Calviani / C. Densham
M. Calviani / C. Densham
15:40 - 17:00
Contributions

15:40 Spallation Neutron Source Target Module Design Improvements - Drew Winder (Oak Ridge National Laboratory)

16:00 The LIEBE high-power target: Offline commissioning results. - Ferran Boix Pamies (CERN)

16:20 The ESSnuSB Target Station - Piotr Cupial (AGH University of Science and Technology, Krakow, Poland)
17:00
17:00 - 19:20
Contributions

17:00 Targets for the SPES project and its applications: material selection and release simulations - Michele Ballan (INFN-LNL)

17:10 Fluidised Tungsten Powder Studies at Rutherford Appleton Laboratory - Dan Wilcox (RAL)

17:20 Exploratory study for the production of Sc beams at the ISOL facility of MYRRHA - Martin Ashford (SCK•CEN)

17:30 Microstructural Characterization of Proton-Irradiated Ti-15V-3Cr-3Sn-3Al and SiC-Coated Graphite - David Senor (Pacific Northwest National Laboratory)

17:40 Last updates of the R&D activities for the redesign of the CERN’s AD-Target - Marco Calviani (CERN)

17:50 Improvised electrsopinning set up for mass producing thicker ceramic nanofiber mat for high power targets - Sujit Bidhar (FNAL)

18:00 HiRadMat: A Unique Facility Testing Materials with High Power Pulsed Beam - Fiona Harden (CERN)

18:10 Energy deposition in Candidate Materials for the Whole-Beam Dumps for the Advanced Photon Source Upgrade - Jeff Dooling (Argonne National Laboratory/Advanced Photon Source)

18:20 Ion irradiation damage in commercially pure Titanium and Ti-6Al-4V: Characterization of the microstructure and mechanical properties - AIDA Amroussia (MICHIGAN STATE UNIVERSITY)

18:30 Diffusion of tritium produced in a graphite and SiC target - Naritoshi Kawamura (KEK/J-PARC)

18:40 Status of large area disk target development for ISOL facility of RAON - MIJOUNG JOUNG (IBS)

18:50 Thermal Simulations method for rotated target - Matthieu Michel (CNRS-GANIL)

19:00 Design of the Future High Energy Beam Dump for the CERN SPS - Antonio Perillo-Marcone (CERN)
Wednesday, 6 June 2018

08:50

08:50 - 09:00
09:00 M. Calviani / C. Densham
M. Calviani / C. Densham
09:00 - 09:40
Contributions

09:00 Mark IV Upper Target Design for the Lujan Center 1L Target at LANSCE - Keith Woloshun (LANL)

09:20 In-situ studies of phase transition related Pb transport in the SINQ target rods with use of the NEUTRA imaging instrument at PSI - Sergejs Dementjevs (Paul Scherrer Institut)
09:40 Session 4 discussion
Session 4 discussion
09:40 - 10:00

10:00 Coffee Break
Coffee Break
10:00 - 10:20
Room: 1300 FRIB Lobby
10:20 A. Perillo Marcone / D. Winder
A. Perillo Marcone / D. Winder
10:20 - 12:00
Contributions

10:20 Neutron Source Manufacturing at SNS - Peter Rosenblad (Oak Ridge National Laboratory)

11:00 Detailed design, prototyping activities and beam irradiation tests for the new n_TOF neutron spallation target - Marco Calviani (CERN)

11:20 Progress with manufacturing the first target module for ISIS TS1 Project - Leslie Jones (ISIS Synchrotron)

11:40 Measuring Residual Strain after Hot Isostatic Pressing of ISIS Target Plates - Dan Wilcox (RAL)
12:00 Session 6 discussion
Session 6 discussion
12:00 - 12:20

12:20 Lunch Break
Lunch Break
12:20 - 13:20

13:20 FRIB Tour
FRIB Tour
13:20 - 15:00

15:00 Buffer
Buffer
15:00 - 15:20

15:20 Coffee Break
Coffee Break
15:20 - 15:50
15:50 T. Naoe / Y.J. Lee
T. Naoe / Y.J. Lee
15:50 - 17:30
Contributions

15:50 Design of high temperature ISOL targets - Mattia Manzolaro (INFN-LNL)

16:30 Design and prototyping of the CERN Proton Synchrotron Internal Dump in the Framework of the LHC Injectors Upgrade Project - Francois-Xavier Nuiry (CERN)

16:50 Handling, Storage, & Disposal of Neutrino Beam Components at Fermilab - Cory Crowley (Fermi National Accelerator Lab)

17:10 High Power ISOL Target Remote Handling Developments at TRIUMF - Grant Minor (TRIUMF)
17:30 Session 5 discussion
Session 5 discussion
17:30 - 17:50
Thursday, 7 June 2018

08:50

08:50 - 09:00
Room: 1200 FRIB Building
09:00 T. Naoe / Y.J. Lee
T. Naoe / Y.J. Lee
09:00 - 10:20
Contributions

09:00 Beam Dump Facility (BDF) at CERN radiological and environmental assessment - Heinz Vincke (CERN)

09:20 Design and development of Super-FRS target area components and remote handling - Faraz Amjad (GSI Helmholtzzentrum für Schwerionenforschung GmbH)

09:40 SNS Hot Cell Design Philosophy - Michael Dayton (ORNL-SNS)

10:00 Design and Operation of the Mu2e Target Remote Handling System - Michael Campbell (FNAL)
10:20 Coffee Break
Coffee Break
10:20 - 10:50
Room: 1300 FRIB Lobby
10:50 T. Naoe / Y.J. Lee
T. Naoe / Y.J. Lee
10:50 - 12:30
Contributions

10:50 Preliminary design study of the integration and remote handling processes for the Beam Dump Facility Target Complex - Keith Kershaw (CERN)

11:10 ISIS Second Target Station 2 Extracted Proton Beam Window Replacement - DAN COATES (STFC\UKRI\RAL\ISIS)

11:30 An engineering review of the ISIS facility extracted proton beam windows. - Daniel Blanco Lopez (UKRI/STFC, RAL, ISIS)

11:50 SNS Core Vessel Water Leak Saga - Michael Dayton (ORNL-SNS)
12:30 Lunch Break
Lunch Break
12:30 - 13:30
13:30 H. Okuno / C. Stodel
H. Okuno / C. Stodel
13:30 - 15:10
Contributions

13:30 Radiation Protection at CERN - learn from the past and prepare for the future - Heinz Vincke (CERN)

14:10 Spallation Neutron Source Status Update - Bernard Riemer (Oak Ridge National Laboratory)

14:30 Commissioning of Gas Injection at SNS - Charlotte Barbier (ORNL)

14:50 Development of High-Radiation-Tolerant Fiber-Optic Sensors for SNS Mercury Target Strain Measurement - Yun Liu (Oak Ridge National Laboratory)
15:10 Coffee Break
Coffee Break
15:10 - 15:40
Room: 1300 FRIB Lobby
15:40 H. Okuno / C. Stodel
H. Okuno / C. Stodel
15:40 - 17:40
Contributions

15:40 Analysis and Operational Feedback on the Current High Energy Beam Dump in the CERN SPS - Antonio Perillo-Marcone (CERN)

16:00 Targets for S3: design, fabrication and control under irradiation - Christelle STODEL (Grand Accélérateur National d'Ions Lourds)

16:20 Perspective of muon production target at J-PARC MLF MUSE - Shunsuke Makimura (J-PARC/KEK)

16:40 Target system maintenance experience in hot cell at J-PARC - Takashi Naoe (Japan Atomic Energy Agency)
17:40 Tranport to Workshop Banquet
Tranport to Workshop Banquet
17:40 - 18:30

18:30 Workshop Banquet
Workshop Banquet
18:30 - 21:30
Room: Michigan Princess

21:30 Transport to select hotels
Transport to select hotels
21:30 - 22:30
Friday, 8 June 2018

08:50

08:50 - 09:00
Room: 1200 FRIB Building
09:00 W.Mittig / T. Stora
W.Mittig / T. Stora
09:00 - 10:20
Contributions

09:00 Isotope Harvesting at FRIB - Gregory Severin (Facility for Rare Isotope Beams)

09:40 High Power Liquid Lead-bismuth Targetry for Intense Fast Neutron Sources Using a Superconducting Electron Linac - Mayir Mamtimin (Niowave Inc.)

10:00 Compact Sealed lithium target for accelerator-driven BNCT system - Kazuki Tsuchida (Nagoya University)
10:20 Coffee Break
Coffee Break
10:20 - 10:50
Room: 1300 FRIB Lobby
10:50 W.Mittig / T. Stora
W.Mittig / T. Stora
10:50 - 11:30
Contributions

10:50 Physics Beyond Colliders at CERN - Mike Lamont (CERN)
11:30

11:30 - 12:30

12:30 Lunch - Box lunches
Lunch - Box lunches
12:30 - 13:30