Name: 2018 High Power Targetry Workshop
Start: 2018-06-04T08:45:00-04:00
End: 2018-06-08T17:00:00-04:00
Location: No location set

A first integrated CERN-ISOLDE spallation source operated at 2000°C with GW instantaneous beam power for isotope production (in session "Session 1-R&D to Support Concepts")

A high power density beam dump for ISOL@MYRRHA (in session "Session 4-Target Design, Analysis, Validation of Concepts")

An engineering review of the ISIS facility extracted proton beam windows. (in session "Session 5-Target Facility Challenges")

Analysis and Operational Feedback on the Current High Energy Beam Dump in the CERN SPS (in session "Session 7-Operation of Targets and Beam Dumps")

Beam Dump Facility (BDF) at CERN radiological and environmental assessment (in session "Session 5-Target Facility Challenges")

Beam Dump Facility target: design status, beam tests in 2018 and material studies (in session "Session 1-R&D to Support Concepts")

Blister formation at subcritical doses in Tungsten irradiated by MeV protons (in session "Session 2-Radiation Damage in Target Material and Related Simulations")

Commissioning of Gas Injection at SNS (in session "Session 7-Operation of Targets and Beam Dumps")

Compact Sealed lithium target for accelerator-driven BNCT system (in session "Session 8-Multipurpose Use of Targets and Beam Dumps")

Design and development of Super-FRS target area components and remote handling (in session "Session 5-Target Facility Challenges")

Design and Operation of the Mu2e Target Remote Handling System (in session "Session 5-Target Facility Challenges")

Design and prototyping of the CERN Proton Synchrotron Internal Dump in the Framework of the LHC Injectors Upgrade Project (in session "Session 5-Target Facility Challenges")

Design of high temperature ISOL targets (in session "Session 5-Target Facility Challenges")

Design of the Future High Energy Beam Dump for the CERN SPS (in session "Poster Session and Reception")

Detailed design, prototyping activities and beam irradiation tests for the new n_TOF neutron spallation target (in session "Session 6-Construction, Fabrication, Inspection, Quality Assurance")

Development of High-Radiation-Tolerant Fiber-Optic Sensors for SNS Mercury Target Strain Measurement (in session "Session 7-Operation of Targets and Beam Dumps")

Diffusion of tritium produced in a graphite and SiC target (in session "Poster Session and Reception")

Energy deposition in Candidate Materials for the Whole-Beam Dumps for the Advanced Photon Source Upgrade (in session "Poster Session and Reception")

Exploratory study for the production of Sc beams at the ISOL facility of MYRRHA (in session "Poster Session and Reception")

Fluidised Tungsten Powder Studies at Rutherford Appleton Laboratory (in session "Poster Session and Reception")

FRIB Radiation Studies: Damage, Component Lifetimes, Hands-on Accessibility (in session "Session 2-Radiation Damage in Target Material and Related Simulations")

Handling, Storage, & Disposal of Neutrino Beam Components at Fermilab (in session "Session 5-Target Facility Challenges")

High power Beam dump for SARAF phase II (in session "Session 4-Target Design, Analysis, Validation of Concepts")

High Power Capability of the Primary Beam Dump Drum for FRIB – Simulation and Experimental Study (in session "Session 4-Target Design, Analysis, Validation of Concepts")

High Power ISOL Target Remote Handling Developments at TRIUMF (in session "Session 5-Target Facility Challenges")

High Power Liquid Lead-bismuth Targetry for Intense Fast Neutron Sources Using a Superconducting Electron Linac (in session "Session 8-Multipurpose Use of Targets and Beam Dumps")

High Power Targetry at FRIB

High-power converters for RIB production (in session "Session 4-Target Design, Analysis, Validation of Concepts")

HiRadMat: A Unique Facility Testing Materials with High Power Pulsed Beam (in session "Poster Session and Reception")

IAEA Activities in Support of the Accelerator Based Simulation and Modelling of Radiation Damage Effects (in session "Session 2-Radiation Damage in Target Material and Related Simulations")

Improvised electrsopinning set up for mass producing thicker ceramic nanofiber mat for high power targets (in session "Poster Session and Reception")

In-situ studies of phase transition related Pb transport in the SINQ target rods with use of the NEUTRA imaging instrument at PSI (in session "Session 4-Target Design, Analysis, Validation of Concepts")

Investigation of radiation damage effect on advanced materials under different irradiation conditions (in session "Session 2-Radiation Damage in Target Material and Related Simulations")

Ion irradiation damage in commercially pure Titanium and Ti-6Al-4V: Characterization of the microstructure and mechanical properties (in session "Poster Session and Reception")

ISIS Second Target Station 2 Extracted Proton Beam Window Replacement (in session "Session 5-Target Facility Challenges")

Isotope Harvesting at FRIB (in session "Session 8-Multipurpose Use of Targets and Beam Dumps")

J-PARC neutrino beam-line and radiation damage studies on Titanium alloys (in session "Session 2-Radiation Damage in Target Material and Related Simulations")

Last updates of the R&D activities for the redesign of the CERN’s AD-Target (in session "Poster Session and Reception")

Mark IV Upper Target Design for the Lujan Center 1L Target at LANSCE (in session "Session 4-Target Design, Analysis, Validation of Concepts")

Measurements of Target Strain Mitigation by Gas Injection (in session "Session 1-R&D to Support Concepts")

Measuring Residual Strain after Hot Isostatic Pressing of ISIS Target Plates (in session "Session 6-Construction, Fabrication, Inspection, Quality Assurance")

Microstructural Characterization of Proton-Irradiated Ti-15V-3Cr-3Sn-3Al and SiC-Coated Graphite (in session "Poster Session and Reception")

Neutron Source Manufacturing at SNS (in session "Session 6-Construction, Fabrication, Inspection, Quality Assurance")

NOVA Medium energy target ME-1 autopsy, procedure and equipment (in session "Session 3-Post Irradiation Examination")

Operation of and Upgrade Plans for the LANSCE Pulsed Neutron Sources (in session "Session 4-Target Design, Analysis, Validation of Concepts")

Optimization of the LBNF Neutrino Beam (in session "Session 1-R&D to Support Concepts")

Perspective of muon production target at J-PARC MLF MUSE (in session "Session 7-Operation of Targets and Beam Dumps")

Physics Beyond Colliders at CERN (in session "Session 8-Multipurpose Use of Targets and Beam Dumps")

Post-irradiation examinations of SINQ Target-11 (in session "Session 3-Post Irradiation Examination")

Preliminary design study of the integration and remote handling processes for the Beam Dump Facility Target Complex (in session "Session 5-Target Facility Challenges")

Progress of specimen cutout and damage inspection for used mercury target vessel at J-PARC (in session "Session 3-Post Irradiation Examination")

Progress with manufacturing the first target module for ISIS TS1 Project (in session "Session 6-Construction, Fabrication, Inspection, Quality Assurance")

RaDIATE thermal shock experiments at CERN’s HiRadMat facility (in session "Session 1-R&D to Support Concepts")

Radiation Protection at CERN - learn from the past and prepare for the future (in session "Session 7-Operation of Targets and Beam Dumps")

Research of Materials in Target Environment at European Spallation Source (in session "Session 1-R&D to Support Concepts")

SNS Core Vessel Water Leak Saga (in session "Session 5-Target Facility Challenges")

SNS Hot Cell Design Philosophy (in session "Session 5-Target Facility Challenges")

Spallation Neutron Source Status Update (in session "Session 7-Operation of Targets and Beam Dumps")

Spallation Neutron Source Target Module Design Improvements (in session "Session 4-Target Design, Analysis, Validation of Concepts")

Status of large area disk target development for ISOL facility of RAON (in session "Poster Session and Reception")

Status Update of PIE Irradiated Materials from BLIP at PNNL (in session "Session 3-Post Irradiation Examination")

Target system maintenance experience in hot cell at J-PARC (in session "Session 7-Operation of Targets and Beam Dumps")

Targets for S3: design, fabrication and control under irradiation (in session "Session 7-Operation of Targets and Beam Dumps")

Targets for the SPES project and its applications: material selection and release simulations (in session "Poster Session and Reception")

Techniques and Accomplishments of the Post Irradiation Examination Program at the Spallation Neutron Source (in session "Session 3-Post Irradiation Examination")

The ESSnuSB Target Station (in session "Session 4-Target Design, Analysis, Validation of Concepts")

The Influence of High Energy Proton Irradiation on Fine-Grained Isotropic Graphite Grades: A Summary of Recent RaDIATE Results (in session "Session 2-Radiation Damage in Target Material and Related Simulations")

The LIEBE high-power target: Offline commissioning results. (in session "Session 4-Target Design, Analysis, Validation of Concepts")

Thermal diffusivity of proton and spallation neutron irradiated tungsten (in session "Session 3-Post Irradiation Examination")

Thermal Simulations method for rotated target (in session "Poster Session and Reception")

Tungsten Oxidation AeroSol Transport (TOAST) Experiments (in session "Session 1-R&D to Support Concepts")

Welcome Talk