MICE RF System Review

Europe/London
Seminar 1 (STFC/Cosener's House, Abingdon, UK)

Seminar 1

STFC/Cosener's House, Abingdon, UK

Mark Palmer (Fermilab)
Description
This MICE RF system plan was substantially modified as part of the re-baselining of the MICE Demonstration of Ionization Cooling.  This review will examine the RF system design, plans for standalone commissioning of the RF modules at RAL, integration and commissioning of the system with the MICE Cooling Channel, as well as the schedule and resources required for each of these elements.  This review represents the first detailed evaluation of the revised plan.  Given the tight schedule constraints of the revised MICE plan, this review is aimed particularly at identifying any issues that require further attention by the RF team as the experiment moves towards deployment of the full Cooling Demonstration.


Review Charge
Supporting Doc: MICE ICD
  • Wednesday, 9 September
    • 09:00 09:30
      Executive Session 30m
    • 09:30 10:00
      MICE Cooling Demonstration Project Overview 30m
      Speaker: Dr Colin Whyte (University of Strathclyde)
      Slides
    • 10:00 10:45
      MICE RF System Introduction 45m
      Speaker: Dr Kevin Ronald (University of Strathclyde)
      Slides
    • 10:45 11:00
      Coffee Break 15m
    • 11:00 11:45
      RF Module Overview 45m
      Speaker: Dr Derun Li (LBNL)
      Slides
    • 11:45 12:10
      RF Station Commissioning Status 25m
      Speaker: Andy Moss (Daresbury Laboratory)
      Slides
    • 12:10 12:30
      RF Station Deployment Plan for the MICE Hall 20m
      Speaker: Alan Grant
      Slides
    • 12:30 13:15
      Lunch 45m
    • 13:15 13:45
      Executive Session 30m
    • 13:45 14:30
      Low-Level RF System Status and Plans 45m
      Speaker: Andy Moss (Daresbury Lab)
      Slides
    • 14:30 15:15
      Standalone Commissioning Plan in MICE Hall 45m
      Speaker: Dr Kevin Ronald (University of Strathclyde)
      Slides
    • 15:15 15:30
      Coffee Break 15m
    • 16:00 16:30
      RF Module Vacuum Interface Requirements 30m
      Speaker: Terry Anderson (FNAL)
      Slides
      Supporting Docs
    • 16:30 17:00
      Executive Session 30m
      Committee questions delivered at conclusion
  • Thursday, 10 September
    • 09:00 09:45
      UK Schedule and Resources 45m
      Speaker: Alan Grant (Daresbury Lab)
      Slides
    • 09:45 10:30
      US Schedule and Resources 45m
      Speaker: Prof. Alan Bross (Fermilab)
      Slides
    • 10:30 11:00
      Coffee Break 30m
    • 11:00 11:30
      RF Module Integration Into Cooling Channel 30m
      Speaker: Dr Colin Whyte (University of Strathclyde)
      Slides
    • 11:30 12:30
      Executive Session 1h
    • 12:30 13:15
      Lunch 45m
    • 13:15 14:00
      Closeout 45m
      Slides
    • 14:00 17:00
      MICE Hall Tour