Name: Joint LARP CM20/HiLumi Meeting
Start: 2013-04-08T08:00:00-05:00
End: 2013-04-10T14:00:00-05:00
Location: Napa Valley, CA

Joint LARP CM20/HiLumi Meeting

from Monday, April 8, 2013 (8:00 AM) to Wednesday, April 10, 2013 (2:00 PM)

Monday, April 8, 2013
9:00 AM
9:00 AM - 12:30 PM
Contributions

9:00 AM Introduction and Project Overview - Eric Prebys (Fermilab)

9:25 AM Magnet Project - GianLuca Sabbi (LBNL)

9:50 AM Crab Cavity Project - Alessandro Ratti (LBNL)

10:40 AM Feedback Project - John Fox (SLAC)

11:05 AM HiLumi status and CERN's role in LARP project - Lucio Rossi (CERN)

11:30 AM LHC Performance and Shutdown Update - Oliver Bruning (CERN)

11:55 AM Beam Instrumentation LHC operational experience, developments and needs for HL-LHC - Gianluigi Arduini (CERN)

12:20 PM FLOAT
12:30 PM Lunch
Lunch
12:30 PM - 1:30 PM
1:30 PM
1:30 PM - 3:30 PM
Contributions

1:30 PM HL-LHC overview from the AP point of view: baseline and latest emerging challenges - Stephane Fartoukh (CERN)

2:00 PM IR layout and main choices for the magnets - Ezio Todesco (CERN)

2:30 PM WP10: Energy Deposition and Radiation Damage in Triplet Magnets - Nikolai Mokhov (Fermilab)

2:50 PM Presentation on RF upgrade work [higher harmonic RF, Crab Cavity field quality] - Erk JENSEN (CERN)
3:30 PM Coffee
Coffee
3:30 PM - 4:00 PM
4:00 PM
4:00 PM - 5:30 PM
Contributions

4:00 PM General Collimation presentation with topics: e-Lens for Halo removal (no FNAL hardware and no SPS test), alternative options for Halo removal, Crystal, LHC quench test, announcement of collimation review - Stefano Redaelli Redaelli (CERN)

4:30 PM Halo Diffusion Model &Effectiveness of Hollow Electron Beam Lens: A Sixtrack study - valentina previtali (CERN)

5:00 PM RHIC electron lens status and test plans and options at BNL - Wolfram Fischer (BNL)
Model magnet fabrication and test
Model magnet fabrication and test
4:00 PM - 6:20 PM
Contributions

4:00 PM Fabrication and test results of the 11T magnet - Fred Nobrega (FNAL)

4:20 PM Fabrication and test results of the HD3 magnet - Maxim MARCHEVSKY (Lawrence Berkeley National Laboratory)

4:40 PM Progress on Fresca2/RMC design and fabrication - Ferracin Paolo (CERN)

5:00 PM HQ02 assembly and next steps - Helene FELICE (Lawrence Berkeley National Lab)

5:20 PM Results from mechanical model of the HQ alternate structure - Jesse SCHMALZLE (BNL)

5:40 PM HQ coil fabrication experience and plans - Franck Borgnolutti (LBNL)

6:00 PM LHQ coil fabrication experience and plans - Miao Yu (Fermilab)
5:30 PM Manager's Reception (hotel provided)
Manager's Reception (hotel provided)
5:30 PM - 7:30 PM
Tuesday, April 9, 2013
8:30 AM
8:30 AM - 12:30 PM
Contributions

8:30 AM Crab System Modeling - Zenghai Li (SLAC)

8:55 AM Crab beam beam studies - Stefan Paret (LBNL)

9:20 AM Proof of Principle cavity preparation and testing: DQW Cavity - Binping Xiao (Brookhaven National Lab)

9:45 AM Proof of Principle cavity preparation and testing: RFD Cavity - Jean Delayen (Old Dominion University)

10:35 AM Path to SPS testing - prototype design: RF Dipole - HyeKyoung Park (Old Dominion University/Jefferson Lab) Rocio Olave (Old Dominion University)

11:00 AM Path to SPS testing - prototype design: DQW - Qiong Wu (Brookhaven National Lab)

11:25 AM Path to SPS testing - prototype design: Cryomodules - Tom Nicol (Fermilab) Tom Peterson (Fermilab)

11:50 AM Planning (common schedule + key milestones) - Erk JENSEN (CERN)

12:15 PM Float
QXF overview, Materials R&D
QXF overview, Materials R&D
8:30 AM - 12:30 PM
Contributions

8:30 AM QXF plan and schedule - Ferracin Paolo (CERN) Giorgio Ambrosio (FNAL TD/MSD)

9:30 AM CERN conductor procurement and QXF cable R&D - Amalia Ballarino (CERN)

10:30 AM LARP conductor procurement - Arup Ghosh (Brookhaven National Laboratory)

11:00 AM LARP QXF cable R&D - Daniel Dietderich (LBNL)

11:30 AM Results of winding tests - Daniel Dietderich (LBNL) Susana Izquierdo Bermudez (CERN)

12:00 PM Cable insulation development - Daniel Dietderich (LBNL) Ferracin Paolo (CERN)
12:30 PM Lunch
Lunch
12:30 PM - 1:30 PM
1:30 PM
1:30 PM - 5:30 PM
Contributions

1:30 PM SPS FB MD results overview - Ozhan Turgut (SLAC, Stanford University)

1:55 PM Kicker Design report and Plans - John Cesaratto (SLAC)

2:20 PM System Development and Upgrade plans - Kristin Pollock (SLAC)

2:40 PM LHC transverse damper operational experience and upgrade plans [narrow band excitations, impact on tune and Q' measurement - Wolfgang HOFLE (CERN)

3:05 PM LLRF models, SPS RF upgrade plans - Claudio Rivetta (SLAC)

4:00 PM Toohig Talk 1 - Joseph Calvey (Cornell University)

4:30 PM Toohig Talk 2 - Ilkyoung Shin (University of Connetticutt)

5:00 PM Toohig Talk 3 - Subashini De Silva (Old Dominion University)
QXF design and integration
QXF design and integration
1:30 PM - 6:30 PM
Contributions

1:30 PM Requirements (electrical, cooling, dose, geometry) - Ferracin Paolo (CERN) Giorgio Ambrosio (FNAL TD/MSD)

2:00 PM Protection systems for Nb3Sn magnets and thresholds in the LHC tunnel - Reiner Denz (CERN)

2:30 PM 2D magnetic analysis and coil cross-section - Franck Borgnolutti (LBNL)

3:00 PM 3D magnetic analysis and coil end design - Susana Izquierdo Bermudez (CERN)

4:00 PM Coil fabrication - Daniel Cheng (LBNL)

4:30 PM Coil tooling - Ferracin Paolo (CERN) Giorgio Ambrosio (FNAL TD/MSD) Miao Yu (Fermilab)

5:00 PM Support structure and mechanical analysis - Helene FELICE (Lawrence Berkeley National Lab) Mariusz Juchno (CERN)

5:30 PM Integration - Ferracin Paolo (CERN)

6:00 PM Quench protection - Giorgio Ambrosio (FNAL TD/MSD)
5:30 PM Manager's Recpetion (Hotel provided)
Manager's Recpetion (Hotel provided)
5:30 PM - 7:30 PM

7:30 PM Dinner
Dinner
7:30 PM - 9:30 PM
Wednesday, April 10, 2013
9:00 AM
9:00 AM - 10:30 AM
Contributions

9:00 AM Tracking studies for HL-LHC - Min-Huey Wang (SLAC)

9:30 AM Update on HL-LHC beam-beam simulations - Alexander Valishev (Fermilab)

10:00 AM Rotatable Collimator Status & Plan - Thomas Markiewicz (SLAC)
IR magnets (other than QXF)
IR magnets (other than QXF)
9:00 AM - 10:30 AM
Contributions

9:00 AM Cooling options for D1 and corrector package - Rob van Weelderen (CERN)

9:30 AM Update on D1 design - Tatsushi NAKAMOTO (KEK)

10:00 AM Design of D2 - Ramesh Gupta (BNL)
10:30 AM Coffee
Coffee
10:30 AM - 11:00 AM
11:00 AM
11:00 AM - 12:15 PM
Contributions

11:00 AM LTV Report: Interplay of Collective Effects and Beam-Beam - Alexey Burov (AD/RR)

11:30 AM QXF IR Quadrupole Summary - Giorgio Ambrosio (FNAL TD/MSD)

11:50 AM Discussion led by a provacoteur - Oliver Bruning (CERN)

12:10 PM Goodbye - Eric Prebys (Fermilab)